background image

LIMITED WARRANTY 

 
 

PARTS AND LABOR WARRANTY INFORMATION

 

SUMMIT Appliances are manufactured to provide outstanding value, and your satisfaction is our goal on every 
product. All SUMMIT major appliances carry a one year limited warranty on both parts and labor. All 
refrigerators and freezers carry an additional four years on the compressor. Certain exclusions may apply. 

Certain models (including SUMMIT ranges, wall ovens, and cook tops) are manufactured for us in the U.S. and 
carry the manufacturer's warranty (also one year parts and on-site labor). 

For details on specific warranty issues, please refer to the warranty packed with the product, or contact us. 

GENERAL PARTS AND LABOR WARRANTY

 

SUMMIT

 warrants, to the original purchaser of every new unit, the cabinet and all parts thereof, to be free 

from defects in material or workmanship, under normal and proper use and maintenance service as 
specified by 

SUMMIT

 and upon proper installation and start-up in accordance with the instruction packet 

supplied with each 

SUMMIT

 unit.  

SUMMIT

’s obligation under this warranty is limited to a period of 12 

months from the date of original purchase. 

Any parts covered under this warranty that are determined by 

SUMMIT

 to have been defective, within the 

above said period, are limited to the repair or replacement, including labor charges, of defective parts or 
assemblies.  The labor warranty shall include pre-approved standard straight time labor charges only and 
reasonable travel time, as determined by 

SUMMIT

  

COMPRESSOR WARRANTY

 

In addition to the warranty period stated above, 

SUMMIT

 warrants its hermetically sealed compressor to 

be free from defects in both material and workmanship, under normal and proper use and maintenance, 
for a period of 60 months from the date of original purchase.  Compressors determined by 

SUMMIT

 to 

have been defective within this extended time period will, at 

SUMMIT

’s option, be either repaired or 

replaced with a compressor or compressor parts of similar design and capacity.  The above said 
extended compressor warranty applies only to hermetically sealed parts of the compressor and DOES 
NOT apply to any other parts or components, including, but not limited to, cabinet, paint finish, 
temperature control, refrigerant, metering device, driers, motor starting equipment, fan assembly, or any 
other electrical component, etc. 

WARRANTY CLAIMS

 

All claims for labor or parts must be made directly through 

SUMMIT

.  All claims should include: model 

number of the unit, the serial number of the cabinet, proof of purchase, date of installation, and all 
pertinent information supporting the existence of the alleged defect.  In case of compressor warranty, the 
compressor model tag must be returned to 

SUMMIT

 along with the above listed information.  All claims 

should be filed within 30 days of completed repair or the warranty claim could be refused.

 

THINGS NOT COVERED BY THIS WARRANTY

 

SUMMIT

’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to 

the additional limitations below.  This warranty neither assumes nor authorizes any person to assume 
obligations other than those expressly covered by this warranty.   

 

NO CONSEQUENTIAL DAMAGES: SUMMIT is not responsible for economic loss; profit loss; or 
special, direct, indirect, or consequential damages, including without limitation, losses or damages 
arising from food or product spoilage claims whether or not on account of refrigeration failure.  

 

WARRANTY IS NOT TRANSFERRABLE: This warranty is not assignable and applies only in favor of 
the original purchaser/user to whom delivered.  Any such assignment or transfer shall void the 
warranties herein made and shall void all warranties, express or implied, including any warranty of 
merchantability or fitness for a particular purpose.  

 

13

Summary of Contents for ACR1515SS















Reviews: