4
SPECIAL CAUTIONS
●
DO NOT
step on the front louver panel of your unit or use it as a step.
●
ONLY
use polarized plugs to plug in your unit.
●
DO NOT CUT OR REMOVE
the ground connection on the electrical cable.
●
CHECK
that the electrical system is grounded
BEFORE
plugging in refrigerator for the first time.
●
The polyurethane in your unit contains cyclopentane gas as a foaming agent. When repairing,
DO
NOT
use other types of polyurethane or mix the existing polyurethane with other types. SUMMIT is
not responsible for changes in the refrigerator if repairs are made by the user or unauthorized
technicians. Contact an authorized distributor for repair information.
●
DO NOT
place hands or other objects in the front louvers, rear grating or the fan guard while in
operation. This can cause personal injury and/or damage the unit.
●
BEFORE
removing the front louver panel for maintenance and cleaning,
DISCONNECT
the un
it’s
power supply to avoid accidents which may be caused by the oscillation of the blade of the fan motor.
●
KEEP HANDS AWAY
from door pivot when door is open.
●
Before loading refrigerator,
CHECK
that shelves are fixed and have the number of supports indicated
for your model in the
Instruction Manual
.
●
CHECK
that the front louver panel and rear grating are in place before plugging in unit.
●
DO NOT
place chemical substances (solvents, reagents) or food in this refrigerator. This equipment
is intended for the storage and display of vaccines, pharmaceuticals and other specimens requiring
refrigeration at precise temperatures.
●
This equipment is intended to be located in a
PHARMACY
. The floor under the unit must be kept
clean.
●
DO NOT
balance or tip unit at more than a 45° angle without the supervision of authorized personnel.
Severe injury can occur.
●
DO NOT
try to repair unit by yourself. Always consult your authorized distributor for service.
●
BEFORE
reporting a problem with your ACCUCOLD® refrigerator, check the plug and fuses or circuit
breaker. If this is not the cause of the problem, call your distributor immediately so a technician can
be sent.
●
The unit’s cooling capacity will decrease if:
○
It is open for long periods,
○
Excessive amounts of product are stored in it.
THIS WILL OVERLOAD UNIT AND INCREASE MALFUNCTION RISK.
