Instruction Manual - Shay Electric
Page 2
Please take care in lifting this large and heavy model. It is
recommended that the locomotive be picked up by grasping it
under the frame on both ends.
Technical Specifications
Scale
1:20.3
Gauge
45mm Gauge
Total Weight
9.25 lb.
Length
16 in.
Width
4.75 in.
Height
7 in.
Minimum Radius 1.2 M, 48 in.
Power
0-24V, Pittman Gearhead Motor
Features
Constant Lighting
* Be sure to leave at least 3” clearance (measured from the inner
rail) on the 46 1/4 ins radius curve to allow for overhang.
The following parts are packaged separately
-
M3 hex head screws
-
3mm hex head screw driver
Caution!
This model is an accurate replica of the original locomotive. It
has sharp and moving parts. The locomotive drive rods are
stainless steel with sharp edges. AT ANY TIME, OPERATORS
MUST NOT BECOME IN CONTACT WITH THE MODEL
WHILE IT IS POWERED. UNDER NO CIRCUMSTANCES
SHALL ACCUCRAFT TRAINS BE RESPONSIBLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING IN
REGARD TO ANY ACCUCRAFT PRODUCT.
Model Features
This limited production model has been handcrafted for Accucraft
Trains by AMMC, one of the most respected makers of large
scale brass models. This museum quality model features:
-
Full cab interior details.
-
Detailed boiler with fittings, domes, pipes, and handrails
-
Operating steel drive rods, valve gear and cross heads
-
Prototypical livery and lettering
-
Steel helical gears in a die-cast transfer box
