V: 1.0 Revised: May. 2019
11
Chapter 5: Initializing the AcuLink 810
5. Initializing the AcuLink 810
The AcuLink 810 has a web interface that users can access to configure settings and view
device data. The AcuLink 810 gateway has two Ethernet ports and also supports communi-
cation via WIFI.
The default IP addresses and default modes are:
Ethernet 1: 192.168.8.101
Ethernet 2: DHCP
WIFI: Access Point Mode
The following will outline the methods on how to initially access the meters web interface.
5.1 Accessing the AcuLink 810 Web Interface
5.1.1 Method 1 - Direct Connection via Ethernet
For the direct connection method, there must be an Ethernet connection from the Eth-
ernet 1 port on the AcuLink and a computer.
D A T A A C Q U S I T I O N S E R V E R
www.
.com
information@itm.com
1.800.561.8187