V: 1.0 Revised: May. 2019
24
Chapter 6: AcuLink 810 User interface
Port:
Users can select either RS485 or USB
Baud Rate:
Select the baud rate of the device, range is from 9600-115200
Data Bit:
Select the number of data bits, either 7 or 8
Parity:
Select the parity of the device from the drop down list
Stop Bit:
Select the number of Stop Bits
Request Timeout:
Select a timeout period for the AcuLink 810 to wait for a response from
the device, range is 1-60 seconds, default for Modbus RTU is 0.5.
NOTE:
Users cannot add device with the same device address (Modbus Slave ID). The device
address must be unique for each device in the RS485 network.
Click 'Submit' once all settings are entered in correctly.
www.
.com
information@itm.com
1.800.561.8187