V: 1.0 Revised: May. 2019
37
Chapter 6: AcuLink 810 User interface
6.9 Date & Time
Users can configure the time and date for the AcuLink 810 from the 'Date & Time' page in the
left navigation panel under the 'CONFIGURATION' menu.
• NTP Enabled:
The AcuLink supports Network Time Protocol where the time can be syn-
chronized with a time server.
• Device Clock:
Users can enter in the time and date manually in the device clock setting.
Once the time and date is chosen the user must click on 'Update Time'.
• Time Sync:
Users can force the time to update on the AcuLink 810 by selecting the 'Sync'
button.
• NTP Time Servers:
By default the gateway uses '0.u.pool.ntp.org' time server. Users can
remove and add their own time servers as needed.
• NTP Server 1;2;3:
Users can enter up to 3 NTP servers in the "NTP Server 1", "NTP Server
2" and "NTP Server 3" fields.
Examples of North American NTP servers are:
0.us.pool.ntp.org
1.us.pool.ntp.org
2.us.pool.ntp.org
3.us.pool.ntp.org
For more NTP servers based on region, visit the following site:
http://www.pool.ntp.org/en/
www.
.com
information@itm.com
1.800.561.8187