background image

4

Connecting the
Balance/Scale to AC Power

§

It is recommended to use only the
included AC adapter for optimal 
performance and safety.

§

Insert plug into the jack 
(located on back of scale)

§

Plug the AC adapter into an electrical
outlet

!

LISTED power supply 11 V–21 V
compliant with NEC Class 2 output.

Below-Balance/Under-Scale 
Weighing

A port for a below-balance weighing
hanger is located on the bottom of
the balance/scale.

§

Open the cover plate on the bottom
of the balance/scale.

§

Attach the sample (e.g., using a sus-
pension wire) to the hanger.

$

Install a shield for protection against
drafts if necessary.

Installing the Battery

(not for models VIC-303, VIC-123,
VIC-4MG, VIC-2MG)

$

Batteries are not included with the
equipment supplied

!

Use only commercially available 9V
batteries. 

!

If you use a rechargeable battery,
recharge it with an external battery
charger.

§

Lay the balance/scale on its side

§

Open the battery compartment:
remove the compartment cover

§

Install the battery in the compart-
ment

$

Make sure the polarity is correct.

!

Close the battery compartment: slide
the cover into position until it snaps
into place

!

Do not throw away used batteries
with normal household waste. 
Rechargeable batteries contain toxic
materials and must be disposed of in
accordance with local waste disposal
regulations.

Leveling the Balance/Scale 

(only for models VIC-303, 
VIC-123, VIC-4MG, VIC-2MG)

§

Always level the balance/scale
again any time after it has been
moved to a different location.
Example: moving bubble from R to L

§

Turn the feet as shown in the dia-
gram until the air bubble is centered
within the circle of the level indicator.

> In most cases this will require several

adjustment steps.

Removing Weights for
Calibration/Span Adjustment

(only for models VIC-612, VIC-212,
VIC-711, VIC-511, VIC-303, 
VIC-123, VIC-4MG, VIC-2MG)

§

Grasp the tab to turn and remove
the weight compartment.

$

Follow instructions on page 12 for
calibration/span adjustment.

Visit www.balances.com for the best prices on Acculab scales

www.balances.com is the original deep discount distributor

Summary of Contents for 98648-013-61

















Reviews: