7
Purpose
With the Counting program you can determine the number of parts or items.
Example:
Determine the number of uncounted parts; weigh in the selectable reference sample quantity (in this example: 20)
Step
Key (or instruction)
Display
1. Select application program
(ZERO) > 2 sec
2. Select Counting
(F) repeatedly
3. Confirm setting
(ENTER)
Symbol “ “ on the display: application is active
4. Place empty container on the balance/scale
5. Zero the balance/scale
(ZERO)
6. Place reference sample quantity (20)
on the balance/scale
7. Select reference sample quantity:
in increments of 1 (1, 2, 3, ..., 99) or
(F) repeatedly (briefly) or
in increments of 10 (10, 20, 30, ...,100)
(F) > 2 sec.
8. Confirm selected reference sample quantity
(ENTER)
9. Place uncounted parts on balance/scale
10. Toggle display between mean piece weight,
total weight, and quantity
(F) repeatedly
11. Unload the balance/scale
12. Counting application: clear the reference value
(ENTER) > 2 sec
13. Reactivate Counting (if no other
(F)
application program has been selected)
14. Repeat procedure starting from Step 5.
Counting
