Leveling the Balance
Purpose:
– To compensate for unevenness at the place of installation
Always level the balance again any time after it has been moved to a different
location. Only the 2 front feet are adjusted to level the balance.
§
Retract the two rear feet (only on models with a rectangular weighing pan).
§
Turn the 2 front feet as shown in the diagram until the air bubble is centered
within the circle of the level indicator.
> In most cases this will require several adjustment steps.
§
On models with a rectangular weighing pan: Lower the 2 rear feet until they
touch the surface on which the balance rests.
Anti-theft Locking Device
§
To secure the balance at the place of installation, fasten a chain or a lock to the
lug located on the rear panel of the balance.
$
Anti-theft locking device (chain and lock): order number LC-1
10
R
L
L
R
R
L
