12
Features
– Taring the balance
– Printing weights
Preparation
§
Switch on the balance:
Press (ON/OFF)
§
Tare the balance, if necessary:
Press (TARE)
$
If necessary, change the configuration settings:
See the chapter entitled “Configuration”
$
If desired, load the factory settings:
See the chapter entitled “Configuration”
Additional Functions
$
Switching off the balance:
Press (ON/OFF)
$
Balance in standby mode:
the current time is displayed
Using Verified Balances as Legal Measuring
Instruments in the EU*:
The type-approval certificate for verification applies only to
non-automatic weighing instruments. For automatic
operation with or without auxiliary measuring devices, you
must comply with the regulations applicable to the place of
installation.
§
Before using the balance as a legal measuring instrument,
calibrate and adjust it at the place of use using the built-in
motorized calibration weight; for details, see
“Calibration/Adjustment” in this chapter.
$
The temperature range (°C) indicated on the verification
label must not be exceeded during operation.
* Including the Signatories of the Agreement on the
Eruopean Economic Area
Basic Weighing Function
