10
©2009 Johnson Level & Tool
Press the key once to make the first position in X-direction flash.
This position is the positive/negative slope position. Press the key
for positive slope indicated by a “O” sign. Press the key
for negative slope indicated by a “-” sign.
Press the key a second time to make the second position in X-
direction flash.
Press the key , the digit in this position increases to a maximum
of 7.
Press the key , the digit in this position decreases to a minimum
of 0.
Press the key a third time to make the third position in X-
direction flash.
Press the key , the digit in this position increases to a maximum
of 9.
Press the key , the digit in this position decreases to a minimum
of 0.
Press the key a fourth time to make the fourth position in X-
direction flash.
Press the key , the digit in this position increases to a maximum
of 9.
Press the key , the digit in this position decreases to a minimum of 0.
Press the key a fifth time to make the fifth position in X-direction
flash.
X-direction SLOPE setting
2406H 5/28/09 9:04 AM Page 10
