10
10
Indicates the UPS output is short and the UPS would
Indicates the UPS output is short and the UPS would
shut down
shut down
Indicates the load is over the SPEC range
Indicates the load is over the SPEC range
Battery Information
Battery Information
Indicates the battery voltage value, which could be
Indicates the battery voltage value, which could be
displayed from 0 to 999Vdc
displayed from 0 to 999Vdc
Indicates the battery capacitance percent, which could
Indicates the battery capacitance percent, which could
be displayed from 0 to 199%
be displayed from 0 to 199%
Indicates the battery is over charged, and the UPS
Indicates the battery is over charged, and the UPS
would be switched to Battery mode
would be switched to Battery mode
Indicates the battery is weak, and the UPS would shut
Indicates the battery is weak, and the UPS would shut
down soon
down soon
Mode/Fault/Warning code Information
Mode/Fault/Warning code Information
Indicates
the
operating
mode
of
the
UPS,
Indicates
the
operating
mode
of
the
UPS,
Mode/Fault/Warning code or parallel quantity could be
Mode/Fault/Warning code or parallel quantity could be
displayed, and the codes are illuminated in detail in the
displayed, and the codes are illuminated in detail in the
following chapter
following chapter
Inverter operating
Inverter operating Information
Information
Indicates the circuit of the inverter is working
Indicates the circuit of the inverter is working
Bypass operating Information
Bypass operating Information
Indicates the circuit of Bypass is working
Indicates the circuit of Bypass is working
Output voltage and frequency and Bypass disable/enable selection
Output voltage and frequency and Bypass disable/enable selection
Information
Information
The four value of the output voltage could be selected
The four value of the output voltage could be selected
when the UPS is in Standby or Bypass mode, and only
when the UPS is in Standby or Bypass mode, and only
one of them could be actived in the same time
one of them could be actived in the same time
The two frequency value of the output voltage could be
The two frequency value of the output voltage could be
selected when the UPS is in Standby or Bypass mode,
selected when the UPS is in Standby or Bypass mode,
and only one of them could be actived in the same time
and only one of them could be actived in the same time
Bypass disable or enable could be selected when the
Bypass disable or enable could be selected when the
UPS is in Standby or Bypass mode, and only one of
UPS is in Standby or Bypass mode, and only one of
them could be actived in the same time
them could be actived in the same time