19
19
6. Operation
6. Operation
6.1 Operation Mode
6.1 Operation Mode
1. Turn on the UPS with utility power supplied (in Line mode)
1. Turn on the UPS with utility power supplied (in Line mode)
1)
1) After you
After you make sure that
make sure that the power
the power supply connection is
supply connection is
correct, and then set the breaker of the battery pack in the “ON”
correct, and then set the breaker of the battery pack in the “ON”
position (this step only for UPS with external battery), after that
position (this step only for UPS with external battery), after that
set
set the
the input breaker
input breaker in th
in the
e “ON”
“ON” position.
position. At this
At this time the
time the fan
fan
rotates and the UPS supplies power to the load via the bypass.
rotates and the UPS supplies power to the load via the bypass.
The UPS operates in Bypass mode, the mode code is “01”.
The UPS operates in Bypass mode, the mode code is “01”.
2) To power on the UPS by simply pressing the ON button
2) To power on the UPS by simply pressing the ON button
continuously for more than 1 second, the buzzer will beep once.
continuously for more than 1 second, the buzzer will beep once.
3)
3) A
A few seconds later
few seconds later, the U
, the UPS turn into L
PS turn into Line mode, and
ine mode, and the mode
the mode
code is “02”. If the utility power is abnormal, the UPS will
code is “02”. If the utility power is abnormal, the UPS will
operate in Battery mode without output interruption of the UPS.
operate in Battery mode without output interruption of the UPS.
2. Turn on the UPS with no utility power supplied (in Battery
2. Turn on the UPS with no utility power supplied (in Battery
mode)
mode)
1)
1) After you make
After you make sure that the
sure that the breaker of the
breaker of the battery pack is
battery pack is in the
in the
“ON” position (this step only for UPS with external battery).
“ON” position (this step only for UPS with external battery).
2)
2) Press the ON butto
Press the ON button continuously for
n continuously for more than 1
more than 1 second to
second to
power on the UPS, and the buzzer will beep once, UPS
power on the UPS, and the buzzer will beep once, UPS
operates in No Output mode, the mode code is “00”.
operates in No Output mode, the mode code is “00”.
3)
3) A
A few seconds later
few seconds later, the UPS turn
, the UPS turn into Battery mode, and the
into Battery mode, and the
mode code is “03”.
mode code is “03”.
3. Turn off the UPS with utility power supplied (in Line mode)
3. Turn off the UPS with utility power supplied (in Line mode)
1)
1) T
To turn off the
o turn off the inverter of the UPS by pressing the
inverter of the UPS by pressing the OFF button
OFF button
continuously for more than 1 second, and the buzzer will beep
continuously for more than 1 second, and the buzzer will beep
once. The UPS will turn into Bypass mode.
once. The UPS will turn into Bypass mode.
2)
2) Upon completion of the abov
Upon completion of the above to turn
e to turn it off, output of electric
it off, output of electric
current of the UPS is still present. In order to cut off the output
current of the UPS is still present. In order to cut off the output