31
31
The UPS does not have the backup function when it is in Bypass mode.
The UPS does not have the backup function when it is in Bypass mode.
The power used by the load is supplied from the utility power via internal
The power used by the load is supplied from the utility power via internal
filter.
filter.
10.3 Line mode
10.3 Line mode
The LCD display in Line mode is shown in the following diagram. The
The LCD display in Line mode is shown in the following diagram. The
information about the utility power, the battery, the UPS output and the
information about the utility power, the battery, the UPS output and the
load could be displayed. The block of “INVERTER” indicates the inverter
load could be displayed. The block of “INVERTER” indicates the inverter
is working. The operating mode code of the UPS is “02”.
is working. The operating mode code of the UPS is “02”.
If output overloaded, the load percent is shown and alarm will keep twice
If output overloaded, the load percent is shown and alarm will keep twice
every second. Y
every second. You should get r
ou should get rid of some
id of some unnecessary loads one by on
unnecessary loads one by one
e
to decrease the loads connected to the UPS less than 90% of its
to decrease the loads connected to the UPS less than 90% of its
nominal p
nominal power capacity.
ower capacity.
Note:
Note:
Please follow the following steps to connect the generator
Please follow the following steps to connect the generator
:
:
●
●
Activate the generator and wait until the operation is stable before
Activate the generator and wait until the operation is stable before
supplying power of the generator to the UPS (be sure that the UPS is
supplying power of the generator to the UPS (be sure that the UPS is
in idle mode). Then turn on the UPS according to the start-up
in idle mode). Then turn on the UPS according to the start-up
procedure. After the UPS is turned on, then the loads can be
procedure. After the UPS is turned on, then the loads can be
connected to the UPS one by one.
connected to the UPS one by one.
Line mode
Line mode