50
The concept of apparent temperature (AT)
is a linear regression that is not restricted and is more
appropriate to outside conditions because it includes wind. and is intended as an assessment of what
exposed body surfaces feel like in cold, windy conditions.
Regression equations of this universal scale are formulated for
‘indoors’/’outdoors in shade but exposed to
wind
’/’outdoors exposed to wind and solar radiation’. Of these, ‘outdoors in shade but exposed to wind’, has
been chosen as most informative.
Pressure Threshold Setting
The pressure threshold (the negative or positive rate of change of pressure signifying a change in the
weather) can be adjusted from 2 mbar/hour to 4 mbar/hour (default level: 2 mbar/hour).
The lower the level pressure threshold setting, the higher sensitivity for weather forecast changes. Locations
that experience frequent changes in air pressure require a higher setting compared to locations where the air
pressure is typically stagnant.
14.6 Restore Factory Default
To restore the console to factory default (Wi-Fi network, Weather server and display), press the MIN/MAX/-
button while installing the batteries at the same time. Wait 3 seconds after installing the batteries to let go of
the MIN/MAX /- button.
10. Specifications
10.1 Wireless Specifications
•
Line of sight wireless transmission (in open air): 100m
•
Frequency: 433 MHz
•
Integrated Outdoor Transmitter interval: 16 seconds.
•
Thermo-hygrometer Transmitter update interval: 60 seconds
10.2 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement
Range
Accuracy
Resolution
Indoor Temperature
0 to 60 °C
± 1 °C
0.1 °C
Outdoor Temperature
-40 to 60 °C
± 1 °C
0.1 °C
Indoor Humidity
10 to 99 %
± 5% (only guaranteed
between 20 to 90%)
1 %
Outdoor Humidity
10 to 99%
± 5% (only guaranteed
between 20 to 90%)
1 %
Sensors 1-8 Temperature
-40 to 60 °C
± 1 °C
0.1 °C
