30
Cleaning the unit
1. Turn unit off and disconnect the lead wires from
the unit.
2. Clean the device after use with a soft, slightly
moistened cloth. Wipe gently.
n
Do not use chemicals (like thinner, benzene).
n
Do not let water get into the internal area.
Note:
n
This device and accessories do not require
sterilization.
CLEANING AND STORAGE
Cleaning the electrode pads
1. Turn the power off and remove the lead wires
from the pads.
2. Wash the pads when the adhesive surface
becomes dirty and/or the pads are difficult to
attach.
n
Wash the pad softly with your fingertips
under slow running cold water for several
seconds (do not use a sponge/cloth/sharp
object like a nail on the adhesive side. Do not
use detergents, chemicals or soap).
3. Dry the pads and let the adhesive surface air-dry
completely (do not wipe with a tissue paper
or cloth).
CAUTION:
The life of pads may vary by
the frequency of washing, skin condition,
and storage state.
n
If the pad no longer sticks to your skin or the
pad is broken, you should replace them with
new pads. AccuRelief™ Universal Supply Kit
(ACRL-0001).