72
To recall the recipe entered in the
database, use the "
Select From List
"
command, select the recipe you want and
proceed as shown below.
After selecting the desired recipe, a
summary screen will be displayed showing
all the components and their amount
needed to make the recipe.
Tap the "
Ok
" key to confirm and proceed
by entering the multiplication factor needed
to determine the total amount of the recipe.
(i.e. if the recipe has been stored to
produce 10g of product and you want to
produce 100g insert a "K" factor of 10). If
the entered value does not allow the dosing
of one of the components because its
quantity exceeds the scale capacity, it will
not be accepted.
If the total weight of the recipe instead
exceeds the scale capacity, but the
individual components are lower, it will be
asked whether to proceed with the
"separate recipe".
▪
Yes:
to proceed with the separate
recipe.
▪
No:
to change the value of the
multiplier factor "K" and reduce the
quantities.
The recipe screen shows the type of recipe
you are using by displaying two symbols as
described below:
Symbol displayed in case of "
unique
recipe
".
Symbol displayed in case of "
separate
recipe
".
Summary of Contents for Tx Series
Page 7: ...6...
