148 mm x 210 mm
BACK
MY
GOAL
MEMORY
Mode
indicator
Goal
Display
Steps
Counted
MODE
Button
MEMORY
Button
RESET Button
For comprehensive instructions including
instructional videos, registration,
warranty details, go to
www.accusplit.com/support
or scan QR code.
CHOOSING STEP AND TIME GOALS
This unit can store your personal goals for steps and activity
time during step activity. The default values are 3,500 steps
and 30 minutes of activity time. Choose goals to fit your
current activity level.
GOAL TRACKING
When viewing Steps or Activity TIME, you will see the
results in the display, and also the percentage progress
towards your Goal on the bottom of the display, shown
as a series of 20 small bars appearing on the bottom of
the display, with each bar representing 5% of the total.
TOTAL vs. TRIP MEMORIES
The TRIP memories are displayed in normal operating mode,
and can be reset whenever you want, just like the Trip
odometer on cars.
The TOTAL Memories keep track of your progress over a long
period of time. You may wish to reset your total memories
once per week, per month, per year, or never! It can be fun
to see how many steps or how much distance you walk in
a long period of time.
As steps are taken, the pedometer increases the step count
for both Trip and Total memories simultaneously. Activity Time
is counted automatically whenever steps are being counted.
Press the MEMORY button (“M”) to display TOTAL memories.
The “T” icon for “TOTAL” disappears when displaying TRIP
memory values. In Total Step Memory, the unit displays
Steps ÷ 1,000, so that up to 10,000,000 steps is shown as 9999.9.
Activity Time is displayed in Hours, up to 100,000 as 99999.
Entering set mode and setting Step Goal
1. Repeatedly Press the MODE button until the pedometer
displays the current step count. (The display will show
a line underneath the word “STEP” on the label.)
2. Press and Hold the S1 button for 2 seconds. The step
count display will start to flash, showing that you’ve
entered SET mode. You’ll also notice the “G” indicator
has come on, indicating that you are ready to set your
Step Goal.
3. Press the S3+ button to increase the Step Goal value.
Press the S3– button to decrease the Step Goal.
Hold the buttons down to change values quickly.
4. Press the S2 button to select the next setting
(adjust the Activity Time Goal).
Setting Activity Time Goal
1. After Pressing S2, you will see the indicator bar shift
to be underneath “TIME” on the label. The “G” indicator
will be on. The display will show a flashing time, which
is your Activity Time Goal.
2. Press the S3+ button to increase the Activity Time Goal,
Press the S3– button to decrease the Activity Time Goal.
Hold the buttons down to change values quickly.
Note: If you need to go back and change some of the
values, simply Press S2 to cycle through all of the settings
until you see the one you want to change.
Exiting Set Mode
Press and Hold the S4 button for 2 seconds. The unit will
exit setting mode – no values will be flashing anymore.
Note: The unit will save any changes and exit set mode
after 30 seconds unattended.
CHANGING STEP FILTER SETTING
While the JW200 PedometerEngine™ Step Sensor is
the benchmark for accuracy, some people like to have
the ability to fine tune a filter. Therefore, the unit has
a variable setting step filter, to allow fine-tuning to your
specific preferences. You can set the value to any value
from 0–5 steps. For example, if the filter is set to “3”,
the unit will wait to start counting steps until more than
three steps have been taken in less than five seconds.
Press and Hold S1 for over 4 seconds to Enter the Deep
SET Mode. The display will show a flashing step filter
value between 0 and 5.
Press S3+ or S3– to change the step filter setting.
Press and Hold S4 for 2 seconds to exit Deep Set Mode.
Note: The unit will save any changes and exit set mode
after 30 seconds unattended.
Mode
indicator
Goal
Display
Steps
Counted
S3+
Button
S1,S2,S4
Button
S3– Button
SETTING PROCEDURE
ACCUSPLIT products use a common setting procedure
known as “S1- S2-S3-S4.” Here’s how it works:
Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode
You can enter and exit Set mode from any of the regular
display screens. Once in Set mode, you can cycle through
all of these settings by Pressing S2 repeatedly:
Set Step Goal
Set Activity Time Goal
Set Step Goal
We recommend that you adjust the settings all at once,
using the procedure below.
MY
GOAL
MEMORY
