13
8 Specifications
Inputs:
1 x RCA (unbalanced)
1 x XLR (balanced)
Input impedance:
RCA - 15 k
XLR - 16 k
Output:
2 loudspeaker terminals (WBT)
Minimum loudspeaker impedance:
2
Voltage gain:
30.0 dB
Rated power output:
approx. 1,500 watts on 2
(at THD+N = 0,1 %)
approx. 1,350 watts on 4
approx. 880 watts on 8
(at each THD + N = 0,1% at 230VAC)
Distortion factor (THD+N):
0,003% on 4
load at 1kHz and 10 watts
Frequency response 10 Hz
–
50,000 Hz (+0/-0,5dB)
(at 10 watts
on 4
)
Signal to noise ratio:
-96 dB A (ref. 6.325 V)
Power consumption at idle:
appr. 120 watts
Loading and screening capacity:
> 110,000 µF
Zero signal current setting:
300 mA
Protection circuits:
clipping, HF oscillations and too high DC offset
Dimensions (H x W x D)
350 x 482 x 430 mm / 13.8 x 19 x 16.9 inches
Weight:
approx. 60 kg / 132 lbs.
9 Copyright, trademarks, warranty
Copyright:
This instruction manual was correct at the time of going to press. The manufacturer reserves the right to make
changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of
technical development.
This manual is done by ACCUSTIC ARTS Audio GmbH.
Copyright © 2016. All rights reserved.
Trademarks:
ACCUSTIC ARTS
®
is a registered trademark of ACCUSTIC ARTS Audio GmbH.
