background image

 

4

 

 

Never operate the appliance with the housing open. 

 

 

From time to time check the mains cable and the appliance for damages. Take care that the mains 

cable is not buckled or damaged by any house pets. 

 

The mains cable of this appliance is equipped with an equipment grounding conductor. This equipment 

grounding conductor must never be disconnected or taped over. In case any humming occurs, please 

contact your authorized dealer. 

 

 

Never move the appliance by pulling the mains cable. Make sure the mains cable cannot get caught in 

any way. Do not wind the mains cable around the appliance and do not bend it. 

 

 

Never use accessories which are not recommended by the manufacturer. They could constitute a 

danger to the user and risk to damage the appliance. 

 

 

To clean the aluminium housing, please only use a cloth moistened with water and some detergent. 

Never use inflammable or chemically aggressive cleaning agents. 

 

 

In the event of a defect, please never attempt to repair it yourself. Any tampering with the appliance 
by an unauthorised person will make the warranty void. Please get in contact with your authorized 

dealer. 

 

 

Refer all servicing to qualified service person. Servicing is required when the appliance has been 

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects 

have fallen into the appliance, the appliance has been exposed to rain or moisture, does not operate 

normally or has been dropped. 

 

 

Never bypass a fuse. 

 

 

Replace fuses only with original types having the same ampere value, the same voltage endurance and 

the same time-lag. You can find the corresponding value in chapter 

8. 2

 of this instruction manual. 

 

 

No user-serviceable parts inside. 

 

 

 

 

 

 

 

 

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert 

may be of sufficient magnitude to constitute a risk of electric shock to persons. 

 

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operation and maintenance (servicing) instructions in the literature 

accompanying the appliance. 

 

dicates compliance of this device with the EMC (Electromagnetic 

Compatibility) and LVD (Low Voltage Directive) standards of the European Community. 

 

 

Remarks in the manual: 

 

WARNING!  

Calls attention to a procedure, practice, condition or the like that, if not correctly 

performed or adhered to, could result in personal injury or death.  

 

CAUTION! 

Calls attention to a procedure, practice, condition or the like that, if not correctly 

performed or adhered to, could result in a damage or destruction to part or the 

entire component. 

 

To guarantee a reliable function of this unit over the long-term we kindly ask you to thoroughly read this 

instruction manual before connecting this unit and to observe the following instructions. This is also 

necessary for your own safety when dealing with the unit. 

 

 

 

Summary of Contents for PLAYER I












Reviews: