ACS-61100 User’s Manual
CUSTOM ARRAY CONFIGURATION
1. To change the details of an Array go to
RAID
Configuration
>
Create Array
>
Custom Array
Configuration
. See the screen below for configuration
details.
2. Use
the
arrow keys to select the array. Press
Enter
.
3. Use
to select:
3.1 RAID Level. Press
Enter
.
3.1.1 Use
to select the RAID Level between
0,1,5,6, 0+1. Press
Enter
.
3.2 Init Type. Press
Enter
.
3.2.1 Use
to select On-The-Fly or Evaluation.
Press
Enter
.
Note:
On-The-Fly is the recommended type as it
contains parity.
3.3 Stripe Size. Press
Enter
.
3.3.1 Use
to select between 8k, 16k, 32k, 64k,
128k or 256k.
Note:
The recommended stripe size is 256k.
3.4 Drive Member. Press
Enter
.
3.4.1 Use
to select
Add
.
3.4.2 Use
to select the disk to add. Press
Enter
.
3.4.3 Repeat step 3.4 as necessary to add all
required disks.
4. Use
to go to
CREATE
. Press
Enter
.
1.
Go to custom
RAID Config.
2.
Select
Array.
3. Enter the RAID
Level, Init Type,
Stripe Size and
Disks.
4. Go up to
CREATE.
28
Summary of Contents for ACS-61100
