4. How to Use
User Guide
Page 4-5
(2) SAN – add controller remotely
In a SAN connection, you can manually add controller via network.
1.
Click on Controller on the menu bar and select
Manual Add controller
.
2.
Enter the Server or Switch IP.
3.
Click
Search
and wait for the Serial Number to populate.
4.
Type the password (default is 00000000) for the controller.
5.
Click
Add
to finish adding the controller.
Note
To remove a controller from RAIDGuardX list, select a controller
and then click the
Remove Controller
button to remove the
controller from the table. When the popup window appears,
select
Yes
.
4.1.3
Planning your RAID
Before create RAID, it is a good idea to become familiar with the variety of
configurations, or schemes, that are available for the ExaSAN RAID storage. This section
describes these schemes and illustrates how each RAID level is applied.
RAID Level
Description
Capacity
RAID 0
Striping, the fastest and most
Total of all drives
Summary of Contents for ExaSAN A12S2-PS
