ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE
EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT
“DESKTOP RAID”
DOCUMENT STATUS
OFFICIAL RELEASE
REV.
G–05-NOV-2007
PAGE
9
OF 27
This non-interactive mode is implemented by calling the CLI command "RunScript".
For example:
In Sample1.sh(Included in the folder where CLI application is located) under Linux,
it contains the following commands:
./acs_cli RunScript acs_sample1.script
./acs_cli RunScript acs_sample2.script
Both acs_sample1.script and acs_sample2.script contain a bunch of CLI commands.
2.2.2.2 Shell script Mode
This mode is implemented by executing all CLI commands following the format:
acs_cli <CLI command> [Parameters of the CLI command]
For example:
In Sample2.sh under Linux, it contains commands like
./acs_cli CtrlIndex 0
./acs_cli CheckPassword 00000000
…
The first line sets the controller index to 0 and the second line verifies the password
of the controller with index 0.
To complete both Sample1.sh and Sample2.sh successfully, the active controller must
have 4 Spare drives(On slot 1~4) connected. For both scripts, all 4 drives will be
restored to Spare after completing the script successfully.
