background image

[ inspiring people, inspiring change ]

Product in Action

Product in Action

J. Operating the Wireless Headset

I. Understanding LED Indications.

The  LED  Indicators  on  the  headset  and 
the  base  station  show  various  different 
operating status. 

Headset Charging

Off

Headset Pairing

Slow Flash

Headset Online

Normal Flash 

Headset Muted

Fast Flash

Standby 

Slow Blue Flash

Charging

Steady Red

Charged

Steady Blue

Pairing

Blue/Red Flash

Online

Normal Blue Flash

Ringing Signal

Rapid Blue Flash

Low Battery

Very Slow Blue Flash

(7)

(8) 

 Base-Station LED Indicator

Headset LED Indicator

7

8

The 

 Battery Indicator on the base station shows 

the battery level of the wireless headset. In order for it 
to  correctly  show  the  level,  the  headset  must  be 
within operating range with the base station.

(9)

4 LED:

Headset Battery at its Full Capacity

3 LED:

Headset Battery is Above Half Capacity

2 LED:

Headset Batter at Half of its Capacity

1 LED:

Headset Battery is Low, Charge Immediately 

To switch off headset, press and hold the 

 Answer/End Call Button until the 

 

Headset LED turns OFF.

(2)

(8)

To switch on headset, press and hold the 

 Answer/End Call Button until the 

 

Headset LED turns ON.

To  charge  the  headset,  simple  place  the 
headset within the base station cradle.

To  answer  call  with  Handset  Lifter 
installed:  a  tone  will  be  heard  from  the 
headset, simply press 

 Answer Button 

to  talk.  Press  the  button  again  or  simply 
put headset back into base station to end 
call.

(2)

(8)

(2)

2

8

Answering call without Handset Lifter: Lift the handset from its cradle, or 
for some telephone models, press the on-hook button. Then press the
Answer/End Call Button to talk. To end call, press the 

 Button again and 

return the handset to its cradle.

To make calls using Handset Lifter: Press

Answer/End Call Button to 

pick line, dial from the telephone dial pad.

To make calls without Handset Lifter: Lift the handset from its cradle, press 

 Answer/End Call Button, and dial from the telephone dial pad.

 (2) 

(2)

 (2) 

(2)

WT99 WIRELESS TELEPHONE HEADSET

your true wireless handsfree office solution!

9

14

13

Summary of Contents for WT99











Reviews: