DS210_HardwareDocu_V1.50_EN.doc
9 / 20
5 Hardware Configurations
There are four hardware configurations of the DS210 which will be described in the following.
5.1 Hardware Configuration ACD DS210 Standard
The ACD DS210 Standard is suitable for charging the M210, for charging a replacement battery, for data
transfer via USB interface to a PC and for the connection of a USB end device e.g. a USB memory stick.
Pic. 5: Back ACD DS210 Standard
Connections from left to right:
•
Connection power supply pack.
•
The USB-B connector is occupied according to USB Standard. Usual USB-A-B cables can be
connected.
•
The USB-A connector is also occupied according to USB Standard. According to the application usual
USB A-B, USB A-miniB cable, USB A-male – A-B-female extension cable or a USB stick can be
connected.
The USB interfaces of the M210 are only put through the DS210 Standard.
Connect. Power
supply pack
USB-B
USB-A
