M2SmartSE_Set_Brief Overview_V1.11_en_fr
10 / 63
5 Before Initial Start-up
5.1 Starting up the Mobile Handheld Computer
Before starting up the Mobile Handheld Computer for the first time, please make sure that the rechargeable
battery installed in the Mobile Handheld Computer at the factory is fully charged. Connect the docking station
(if included in scope of delivery) to the mains supply with the included power supply and place the Mobile
Handheld Computer in the docking station.
The rechargeable battery is fully charged when the charge LED lights up green.
Now you can start up the Mobile Handheld Computer.
For further information about the Mobile Handheld Computer and the docking station, see the following
chapters.
5.2 Starting up the Docking Station
Place the docking station in a level, stable, clean place that is not in the sun. Plug the power cable into the
external power supply. Plug the DC plug of the power supply into the DC outlet on the back of the docking
station (marked with the DC symbol
).
NOTE
The docking station is disconnected from the power supply by pulling
the power plug.
The associated outlet must be near the docking station and easily
accessible.
6 Handling of Mobile Handheld Computer and Docking Station
6.1 Mobile Handheld Computer
6.1.1 Switching on
To switch the Mobile Handheld Computer on, use the following button:
“On/Off” button
The Status LED lights up green as soon as the Mobile Handheld Computer is switched on. The home screen
of the operating system or the normal working environment appears on the display.
