1
English
1
English
-6
Do not modify the tool, safety devices, or accessories.
Do not use this tool for purposes other than those recommended.
Note the position of the reversing mechanism before operating the tool so as to
be aware of the direction of rotation when operating the throttle.
Exposed throttles shall not be used where obstructions can hold the throttle in
the “on” position.
Periodically check the drive end of the tool to make certain that the socket
retainer functions correctly, and that sockets and drive ends are not excessively
worn which may allow the socket to come off when rotating.
When a secondary handle is supplied, ensure it is properly installed and use two
hands to maintain control when operating tool.
Ratchet wrenches are not torque wrenches.
Applications requiring specific torque
must be checked with a torque meter after installing with an impact wrench. This test
method can only insure a minimum torque was achieved.
DO NOT EXCEED
RECOMMENDED TORQUE RANGE.
Use only impact sockets and accessories.
Do not use hand (chrome) sockets or
accessories.
PRODUCT SPECIFICATIONS
Model Number
ANI812
ANI614
Square Drive
1”
3/4”
Max. Torque
1,400 ft-lbs (1,897 Nm)
1,200 ft-lbs (1,625 Nm)
Working Torque
Range
200~900 ft-lbs
(270~1,219 Nm)
100~950 ft-lbs
(135~1287 Nm)
Standard Bolt Size
1-1/4" (M32)
1" (M25)
Free Speed
6,500 RPM (/min)
6,500 RPM (/min)
Air Consumption
6.7 CFM (189.7 l/min)
6.7 CFM (189.7 l/min)
Overall Length
9-1/16" (230 mm)
8-7/8" (225 mm)
Air Inlet
3/8"
3/8"
Air Pressure
90 PSI (6.2 Bar)
90 PSI (6.2 Bar)
Air Hose
1/2" (13 mm)
1/2" (13 mm)
Net Weight
9 lbs (4.08 kg)
8.58 lbs (3.89 kg)
Heavy Duty
