9/
2
8
/20
22
ACE120
27
Reinstallation
Step 6: The fan is to be installed over the rear vent openings. Align your new fan over the rear
vent openings, aligning the screw holes on the fan with the screw holes on the chassis.
Step 7: From the rear of the case, insert the 4 screws,
in the location noted below, to secure the fan to the
chassis.
Step 8: Connect the fan header cable to the
motherboard for power, CHA_FAN1 (see motherboard
diagram for reference).
Disposal:
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: Any plastic
components within the heatsink fan must be removed separately due to the presence of
brominated flame retardants and shall be disposed or recovered in compliance with Directive
2008/98/EC.