6.
In case all the records in the device is uploaded to Server and ‘SEND’ button is
pressed again, the Instrument will display as ‘No Pending Records’. This message
also ensures that all the records in device memory is now sent to the Server
7.
To check the records in device, please follow
Table 5 [Sl.No 6]
Admin Configuration:
1.
Use the Enter key to input 3 digit password.
There are 2 different passwords – to enter configuration menu OR to delete the
device records [Refer
Table 5
]
2.
Follow
Table 5
to change setting in the Configuration Menu if required
Battery Care:
1.
Do not overcharge the battery. Ideal charging time is 120 Minutes if battery is fully
drained. This is strictly recommended for avoiding any damage to battery.
2.
Charge only if the battery shows 1 blinking bar or if the Instrument is not switching
ON
RFID Care:
1.
Do not expose RFIDs in higher temperature than 50 Deg C
2.
Do not bend the RFID tags
Basic Troubleshooting:
1.
Sensor not responding – Blow air gently in both the sensors placed at the top of
Instrument and check if values are changing.
2.
Network Signal not visible - Check the network or SIM.
Note: The availability of network in device is subject to transmission from Carrier
(Airtel, Vodafone, Idea etc..) and the strength in the region. Also check if the
device is connected to the charging cable and ‘P’ symbol is displayed in the
battery bar
3.
Records not uploading – Place the Instrument in the area with better network
connectivity. Switch off & on the Instrument and perform the SEND operation again.
Page 4
