Bottom Panel
Mode
On Open EQ. Less noise but more power consumption.
1
Off Close EQ.
On Writing default EDID.
*
Set the DIP switch at on and plug in power cord. The green LED will light after the writing
process is completed.
2
Off Record EDID of the connected display via DVI-OUT1
*
Plug in DVI cable first from the display and then plug in power cord. The recording process will
be initiated and the green LED lights. The green LED will turn of after the reading process is
completed.
Warning!! Don’t plug in DVI source while the EX-G048
A
is writing
default EDID or recording EDID from displays. This will cause
damage to the EDID in the flesh memory.
If you cannot boot your computer from the connected EX-G048
A
due
to the damaged EDID in the EX-G048
A
, please proceed the “Writing
default EDID” and then “Recording EDID of the connected display”.
This will enforce the EX-G048
A
to write the EDID from display.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page 6 of 11
