We suggest you connect the monitor with the
lowest resolution
support to the
DVI-OUT 1.
(E.g. Suppose monitor A might support a maximum resolution of 1920 x
1200, monitor B supports a maximum resolution of 1280 x 1024 and monitor C
supports a maximum resolution of 1024 x 768, please connect monitor C to
DVI-OUT 1)
.
Unless you would like to use the default universal EDID, please set DIP switch 2 at
off position, which allows the EX-G048
A
to read the first connected monitor’s EDID.
1. Single Device
1. Connect a monitor, a projector or other displays with DVI inputs by a male-to-male
DVI cable to EX-G048
A
DVI-OUT 1.
2. Plug DVI Y-cable into EX-G048
A
DVI-OUT 2
3. Connect the second and third displays to the DVI female connectors of the Y-cable.
4.
Plug power adapter cable into 5V DC jack.
5. Connect a PC or other devices with DVI outputs to EX-G048
A
DVI-IN.
2. Mutiple deveices- cascading
Hardware Installation
1. Connect a monitor, a projector or other displays with DVI input by a male-to-male DVI
cable to the first EX-G048
A
DVI-OUT 1.
2. Plug DVI Y-cable into EX-G048
A
DVI-OUT 2 and then plug in power adapter.
3. Connect the second display to the DVI female connectors of the long line of the
Y-cable and plug in the short line of the Y-cable to the DVI-IN of the second EX-G048
A
.
4.
Connect the third display to the DVI-OUT 1 of the second EX-G048
A
.
5. Follow from step 2 to step 4 for cascading the remaining devices.
6. Connect a PC or other devices with DVI outputs to the first EX-G048
A
DVI-IN.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page 7 of 11
