Bottom Panel
Mode
On Open EQ. Less noise but more power consumption.
1
Off Close EQ.
On Writing default EDID.
*
Set the DIP switch at on and plug in power cord. The green LED will light after the writing process is
completed.
2
Off Record EDID of the connected display via DVI-OUT1
*
Plug in DVI cable first from the display and then plug in power cord. The recording process will be
initiated and the green LED lights. The green LED will turn off after the reading process is completed.
Warning!! Don’t plug in DVI source while the EX-G048D is writing default
EDID or recording EDID from displays. This will cause damage to the EDID
in the flash memory.
If you cannot boot your computer from the connected EX-G048D due to
the damaged EDID in the EX-G048D, please proceed the “Writing default
EDID” and then “Recording EDID of the connected display”. This will
enforce the EX-G048D to write the EDID from display.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
www.ace-plus.tw
Page
6
of
8
