Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Management 4-11
Configuring Alarm Traps
Alarm traps can be configured at the system level, physical layer, ATM and
multiservice over PSN layer, via the Traps menu. This configuration defines
whether traps are sent for a specific alarm type, using two settings:
•
Active – traps are sent for this alarm
•
Masked – traps are not sent for this alarm.
³
To access the Traps configuration menu:
•
From the Manager List menu (see
), select Traps.
The Traps menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> Manager list> Traps
1. System >
2. Physical >
3. Application >
>
Please select item <1 to 3>
ESC-previous menu; !-main menu; &-exit
Figure
4-10. Traps Menu
Table
4-8. Traps Configuration Menu Parameters
Parameter Description
Possible
Values
System
Mask configuration menu for
system traps
Refer to
and
Physical
Mask configuration menu for
physical traps
Refer to
and
Application
Mask configuration menu for
application-level traps
Refer to
and
³
To access the system traps configuration menu:
•
From the Traps menu, select System.
The system traps list appears.
