Chapter
4 Configuration
Installation and Operation Manual
4-26
Configuring for Management
ACE-3105, ACE-3205 Ver. 5.2
Table
4-18. Notification Entry Parameters
Parameter Description
Possible
Values
Type
Type of the notification to be
generated:
•
1 – Trap. Any messages generated
for selected rows will contain
Unconfirmed-Class PDUs.
•
2 – Inform. Any messages
generated for selected rows will
contain Confirmed-Class PDUs.
Note: if the SNMP entity supports the
generation of Unconfirmed-Class PDUs
only (not Confirmed-Class PDUs), then
this parameter is read-only.
1
2
Default: 1
Name
ASCII string identifying the notification
entry. Enter a new name to add an
entry.
A string of up to 32
alphanumeric characters
Tag
A tag value to be associated with the
current notification entry. This tag is
used to identify the current
notification entry when configuring the
target address.
0–255
Assigning SNMPv3 Traps to Notifications
One or more traps must be assigned to each notification entry.
³
To assign traps to notification entries:
1.
From the SNMPv3 Settings menu, select Targets & Notify.
The Targets & Notify menu is displayed.
2.
Select Trap.
The Trap menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> SNMPv3 Settings> Targets and Notify>
Trap
1. Trap name > ()
2. Notify name > ()
>
Please select item <1 to 2>
B – Back; F - Forward
ESC-prev.menu; !-main menu; &-exit
Figure
4-21. Notify Menu (SNMPv3 Settings)
