Chapter
4 Configuration
Installation and Operation Manual
4-28
Configuring for Management
ACE-3105, ACE-3205 Ver. 5.2
Parameter Description
Possible
Values
Message
Processing
Model
The model to be used when generating SNMP
messages.
SNMPv1
SNMPv2c
SNMPv2u
SNMPv3
Security Model
The security model for the SNMP messages
Any
SNMPv1
SNMPv2c
User-Based Security Model
(USM)
Security Name
Identification of the principal on whose behalf
SNMP messages are to be generated using this
entry. Can be either an SNMPv3 user or an
SNMPv1/SNMPv2 community string.
Up to 32 alphanumeric
characters
Security Level
The level of security to be used when generating
SNMP messages:
•
noAuthNoPriv – Authorization and privacy are
disabled
•
authNoPriv – Authorization is enabled, privacy
is disabled
•
authPriv – Authorization and privacy are
enabled.
noAuthNoPriv
authNoPriv
authPriv
³
To configure the SNMPv3 target addresses:
1.
From the SNMPv3 Settings menu, select Targets & Notify.
The Targets & Notify menu is displayed.
2.
Select Target Address.
The Target Address menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> SNMPv3 Settings> Target&Notify>
Target Address
1. Name ... ()
2. IP address ... ()
3. Params name ... ()
4. Tag list ... ()
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit
Figure
4-23. Target Address Menu
