Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Management 4-29
Table
4-20. Target Address Parameters
Parameter Description
Possible
Values
Name
ASCII string identifying the target.
Enter the name of a new target or use the B and F
keys to browse through the existing addresses.
Up to 32 alphanumeric
characters
IP address
Valid IP address of the target NMS
Must be in the
xxx.xxx.xxx.xxx:162 format,
where 162 is a standard
SNMP port used for sending
traps.
Params name
Select the name of the previously defined target
parameter set to be assigned to this target
Up to 32 alphanumeric
characters
Tag list
Select a tag from the list of previously defined
notification tags
0–255
Mapping SNMPv1 to SNMPv3
ACE-3105, ACE-3205 supports coexistence of different SNMP versions by
mapping SNMPv1/SNMPv2 community names to the SNMPv3 security name
values. The mapping is performed according to the RFC 3584 requirements.
³
To map SNMPv1/SNMPv2 to SNMPv3:
•
From the SNMPv3 Settings menu, select SNMPv1/v3 Mapping.
The SNMPv1/v3 Mapping menu appears.
ACE-3205 – RAD Data Communications
Configuration> System> Management> SNMPv3 Settings> SNMPv1/v3 Mapping
1. Community index ...()
2. Community name ...()
3. Security name ...()
4. Transport tag ...()
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit
Figure
4-24. SNMPv1/v3 Mapping Menu
Table
4-21. SNMPv1/v3 Mapping Parameters
Parameter Description
Possible
Values
Community index
Unique index value of the currently displayed
SNMP community. Enter a new index value or
use the B and F keys to browse through the
defined communities.
Up to 32 alphanumeric
characters
Community name
The SNMPv2/SNMPv2 community name for
Up to 32 alphanumeric
