Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Management 4-33
Configuring the Summer Time Parameters
The summer time parameters define whether/how the unit should automatically
change its internal time when daylight saving time is applied in the geographical
region where ACE-3105, ACE-3205 is installed. This feature can be disabled,
activated on a specific date, or customarily recur.
³
To set the summer time parameters:
1.
From the Date and Time menu, select Summer Time.
The Summer Time menu is displayed.
2.
Select the required summer time mode: Disabled, Recurring or Date.
Based on your selection (
), the Summer Time menu displays
the relevant options.
ACE-3205 – RAD Data Communications
Configuration> System> Date and Time> Summer time
1. Mode > (Disable\Date\Recurring)
>
Please select item <1 to 1>
ESC-Previous menu; !-Main menu; &-Exit
Figure
4-28. Summer Time Mode Selection
Table
4-23. Summer Time Modes
Parameter Description
Possible
Values
Disable
The summer time feature is disabled
Date
The daylight saving time shifting is set to
occur once on a given date, as defined in
the parameters that appear below
See
and
Recurring
The daylight saving time shifting is set to
recur periodically, as defined in the
parameters that appear below
See
and
