background image

Chapter 

 

4  Configuration 

Installation and Operation Manual 

4-48  

Configuring for Operation

 

ACE-3105, ACE-3205 Ver. 5.2 

ACE-3205 – RAD Data Communications 

 

Configuration> Physical layer> Port> SHDSL 

 

1. Port number                ... (1) 

2. Port activation            >   (Enable) 

3. STU                        >   (Remote) 

4. Wires                      >   (2W) 

5. TC layer                   >   (ATM-IMA) 

6. Handshake                  > 

7. Four wire mode             >   (Standard) 

 

Please select item <1 to 8> 

ESC-previous menu; !-main menu; &-exit  

Figure 

 

4-38.  SHDSL Port Configuration Menu 

Table 

 

4-32.  SHDSL Port Configuration Parameters 

Parameter Description 

Possible 

Values 

Port number 

The specific SHDSL port number for which the 
details are displayed 

1–4 

Port activation 

Enable/disable the SHDSL interface. 

Note: When the port is disabled, neither 
events nor traps are sent from this port upon 
physical layer events. SHDSL interfaces cannot 
be disabled if they are part of an IMA group. 

Enable 

Disable 

Default: Enable 

STU 

Indicates whether the unit is a CPE (Remote) 
or CO (Central) 

Note: The current version supports ACE-3105, 
ACE-3205 as CPE (Remote) only. 

Remote 

Wires 

Number of wires for the M-pair group or IMA. 

Note:  

 

This parameter can only be modified if TC 
is set to ATM. 

 

M-pair (ATM) supports only one group. If 
TC Layer is set to ATM, the wires that are 
not part of the IMA group are not 
functional.

 

2W, 4W, 8W 

Default: 2W 

Summary of Contents for ACE-3105



































































































































































































































































































































































































































Reviews: