Chapter
4 Configuration
Installation and Operation Manual
4-62
Configuring for Operation
ACE-3105, ACE-3205 Ver. 5.2
Parameter Description
Possible
Values
Signaling VCI
The VCI that should be used when
creating the XC for signaling traffic
Note: Available only after the port
number has been assigned to the E1
port.
33–65535
32 is reserved for internal
use
Read-only
Signaling multiplexed
frame size
Size of the multiplexed signaling
frame
100–1480
Default: 500
Signaling TX interval
length of the TX interval for signaling
traffic, in milliseconds
4–200
Default: 20
Voice VPI
The VPI that should be used when
creating the XC for voice traffic
Note: Available only after the port
number has been assigned to the E1
port
.
0–5
Voice VCI
The VCI that should be used when
creating the XC for voice traffic
Note: Cannot be changed while an XC
with the same VPI/VCI is configured for
the Abis port.
33–65535
(32 is reserved for internal
use)
Voice multiplexed
frame size
Size of the multiplexed voice
frame
100–1480
Default: 500
Voice TX interval
length of the TX interval for voice
traffic, in milliseconds
20–200
Default: 20
Data VPI
The VPI that should be used when
creating the XC for data traffic
Note: Available only after the port
number has been assigned to the E1
port.
0–5
Data VCI
The VCI that should be used when
creating the XC for data traffic
Note: Cannot be changed while an XC
with the same VPI/VCI is configured for
the Abis port.
33–65535
(32 is reserved for internal
use)
Data multiplexed
frame size
Size of the multiplexed data
frame
100–1480
Default: 500
Data TX interval
length of the TX interval for data
traffic, in milliseconds
20–200
Default: 20
Timeslot
Configure the timeslot for the displayed
Abis port
See
Statistics
Shows the Abis performance
statistics of the Abis port
