Chapter
4 Configuration
Installation and Operation Manual
4-90
Configuring for Operation
ACE-3105, ACE-3205 Ver. 5.2
Parameter Description
Possible
Values
IP mask
Subnet mask of the router interface.
Note: The IP mask address should always be
a sequence of all ones. It cannot include
gaps or zeros in between.
0.0.0.0 –
255.255.255.255 (any
legal IP mask)
Interface type
The router interface type.
Note:
•
The PW interface type is available only if
the PSN license is installed and a PW
connection with an appropriate type
exists.
•
IMA group is available only if ian IMA
group was previously created.
•
PPPoE is based on the PPPoE
configuration (see
)
•
If the router interface is bound to an
ATM VC, check whether the maximum
number of XCs has been reached.
E1/T1
IMA Group
Ethernet
PW
Ethernet RDN group
PPPoE
GRE
ADSL2+
Default: Ethernet
Port number
PW number
Group number
PPPoE ID
The interface port number, the IMA group
number or the PW port number according to
the chosen port type.
Note:
•
Cannot be changed dynamically (on the
fly)
•
If the interface type is PW, only the PW
of type AAL5-SDU with
termination type = Router
can be selected.
•
Ethernet ports cannot be selected if it is
a member of an Ethernet redundancy
group.
E1/T1: 1 –4/8/16
IMA group: 1–5/9/17
Ethernet: 1
PW: The PW number can
be set, configured PW
of type AAL5-SDU with
termination type
Router.
Ethernet group: 1
PPPoE: The PPPoE ID
must be of a configured
PPPoE logical entity of
1.
ADSL2+: 1 – 2
Default: 1
VPI
VPI of the PVC connected to the host
interface.
Note:
•
A router interface with the same VPI as
an existing VP XC on the same port
cannot be configured.
•
VPI is unavailable if Ethernet Port has
been selected as interface type.
0 – 255 for UNI
(max VPI bits is 8)
0 – 4095 for NNI
(max VPI bits is 12)
Default: 0
