Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Operation 4-105
ACE-3205 – RAD Data Communications
Configuration> Applications> Multiservice over PSN> Peer
1. Peer number ... (1)
2. Peer name ... (Peer-1)
3. Peer IP address ... (172.17.143.101)
>
Please select item <1 to 3>
ESC-previous menu; !-main menu; &-exit
Figure
4-76. Peer Menu
Table
4-68. Peer Parameters
Parameter Description
Possible
Values
Peer number
A logical number representing a peer device
1–32
Default: Next available
peer number
Peer name
Name of the peer
Up to 32 characters
Default: Peer-1
IP address
IP address of the peer device.
Note:
•
All routing definitions (IP and static
routes) must be configured in advance
before entering the IP address of the peer
device. For more information, refer to
Configuring the Router Interface
.
•
Peer IP address cannot be the same as
the router IP address.
•
The address part that is not the subnet
cannot be all zeros or all ones.
•
Broadcast, all one- and all zero-IP
addresses are not allowed.
•
Multicast IP addresses, ranging from
224.0.0.0 to 239.255.255.255 are
allowed.
•
If the Peer IP address is changed
dynamically (on-the-fly), the unit resets
upon saving the modified peer.
0.0.0.0 –
255.255.255.255
The remote peer device cannot be removed if a PW is configured for this peer
device.
Note
