Chapter
4 Configuration
Installation and Operation Manual
4-138 Additional Tasks and Options
ACE-3105, ACE-3205 Ver. 5.2
³
To receive a file from the product unit to the local computer:
1.
From the Transfer menu, select Receive File.
The Receive File dialog box appears.
Figure
4-102. Receive File Dialog Box
2.
From the Protocol drop-down list, select Xmodem.
Figure
4-103. Receive File Dialog Box
3.
Click Browse to define the local directory into which the file should be
transferred.
4.
Click Receive.
The specified file is received from the product unit to the local computer.
Saving/Deleting the Default Configuration File
The current configuration of ACE-3105, ACE-3205, including the entire set of
parameters defined through the management menus, can be saved as the default
configuration, meaning that any configuration reset operation (see
Unit to Configuration Defaults
) returns the unit to that saved default
configuration. If there is no configuration saved as default, the factory-default
settings are used on the reset operation.
³
To save the current configuration as default:
1.
From the Utilities menu, select File Utilities.
The File Utilities menu is displayed.
2.
Select File System.
The File System menu is displayed.
