Chapter
6 Monitoring and Diagnostics
Installation and Operation Manual
6-52
Monitoring Performance
ACE-3105, ACE-3205 Ver. 5.2
ACE-3205 – RAD Data Communications
Monitoring> Applications> Bridge> MAC table> View MAC table
VLAN ID MAC address Bridge port Status
1. 1 11-11-11-11-11-11 1 Dynamic
2. 1 22-22-22-22-22-22 2 Static
>
C-Clear counters
ESC-Previous menu; !-Main menu; &-Exit
Figure
6-43. View MAC Table
Table
6-37. View MAC Table Parameters
Parameter Description
Possible
Values
VLAN ID
A valid VLAN ID within the range that was
previously defined in the MAC table menu
See
above
MAC address
A valid MAC address within the range that
was previously defined in the MAC table
menu
See
above
Bridge port
A bridge port within the range that was
previously defined in the MAC table menu
See
above
Status
The status of the device which address
is displayed.
Dynamic
Static
The Clear (C) command clears all dynamic MAC addresses from the MAC table (not
only the displayed MAC addresses).
Viewing the VLAN ID of Bridge Ports
You can find out which VLAN ID is associated with which bridge port(s).
³
To view the VLAN ID of bridge ports:
•
From the Bridge monitoring menu (see
), select View ID of Bridge
Ports.
The VLAN IDs are displayed.
Note
