Installation and Operation Manual
Chapter
6 Monitoring and Diagnostics
ACE-3105, ACE-3205 Ver. 5.2
Monitoring Performance
6-63
Parameter Description
Possible
Values
Out PW label
The PW label that is used in the outbound
direction. Relevant only if the PW subtype
is clock recovery and if the provisioning
mode is set to Manual (for more
information, see
Creating Pseudowire
Connections
in Chapter 4).
1–4095 if the PSN
type is UDPoIP
16–1048575 for any
other PSN type
Out tunnel label
Index of the egress tunnel definition for
this PW. A value of 0 means that the
tunnel label is not used.
In PW label
The PW label that is used in the inbound
direction.
In tunnel label
Index of the ingress tunnel definition for
this PW. A value of 0 means that the
tunnel label is not used.
Max cells (actual)
Displays the actual number of cells for an
ATM PW
PW number
ID number of an existing (previously
defined) PW connection for which the
details are displayed above. You can enter
a different PW number to view its
connection status.
1–66
Displaying Pseudowire Connection Statistics
The pseudowire connection statistics include details regarding RX/TX packets, lost
or recorded packets, and traffic encapsulated over the PW.
³
To display the PW connection statistics:
•
From the PW monitoring menu (see
), select Statistics.
The performance statistics of a PW connection are displayed. The
displayed details are read-only.
For an ATM PW, the details are as shown in
and
. For a
TDM PW, the details are as shown in
and
.
Note
