Installation and Operation Manual
Chapter
6 Monitoring and Diagnostics
ACE-3105, ACE-3205 Ver. 5.2
Monitoring Performance
6-67
Parameter Description
Possible
Values
Malformed
packets
Number of packets that were detected
by a mismatch between the expected
packet size and the actual packet size.
Numerical
Jitter buffer
underrun
Number of times the jitter buffer was in
underrun state.
In normal operation, an underrun event
occurs when the TDM outgoing stream
rate (out of the buffer) is higher than the
PSN incoming stream rate (into the
buffer).
Numerical
Time Elapsed /
Start Time
Time Elapsed is the period in seconds
since the beginning of the current
interval.
Start Time is for intervals 1–24.
0–899
Valid intervals
The number of intervals that are saved
0–24
Interval number
Number of the interval to be displayed.
You can enter a different number of
press ^F to view the next interval.
0–last interval, max 24
0 if no interval
Default: 0
PW number
ID number of an existing (previously
defined) PW connection for which the
details are displayed above. You can
enter a different PW number to view its
connection status, or press F to view the
next PW.
1–66
Monitoring the Remote DSL Connectivity
If ACE-3105, ACE-3205 was set to interconnect with a remote DSL modem
device, you can monitor the DSL connectivity performance.
³
To view the current performance of the DSL connection:
•
From the Applications monitoring menu (see
), select Remote DSL
Modem.
The DSL connection details are displayed.
