Installation and Operation Manual
Chapter
6 Monitoring and Diagnostics
ACE-3105, ACE-3205 Ver. 5.2
Testing the Unit
6-79
Parameter Description
Possible
Values
OAM function
The OAM function of the cell test.
Note: Applicable only in case of an OAM PTI
(see PTI above) or VCI 3/4.
AIS
RDI
CC
Payload
Payload content of the ATM cell.
Note: In case of OAM PTI or VCI3/VCI4
(F4 or F5 OAM cells), the payload is
automatically set as 6A, and it cannot be
changed.
00–FF Hex
Default: 00
Number of cells
The amount of cells to be sent in this test
1–10000
Default: 1
Send cells
Use this command to start or stop the
sending the cells. When off, no cells are
sent.
Send
Off
Default: Off
Performing IP Connectivity Tests
The IP connectivity tests include two types of tests:
•
Ping test – allows you to send packet shares towards a specified IP address
•
IP route tracing – allows you to send trace-route packets towards a specified
IP address.
Pinging IP Addresses
Pinging helps determining the connectivity of ACE-3105, ACE-3205 with a remote
unit over an IP network.
³
To perform a Ping test:
1.
From the Applications diagnostics menu (see
), select IP.
The IP menu appears.
2.
From the IP menu, select Ping.
The Ping test options are displayed.
