Chapter
3 Operation
Installation and Operation Manual
3-4 Configuration
Alternatives
ACE-3105, ACE-3205 Ver. 5.2
3.4
Configuration Alternatives
ACE-3105, ACE-3205 can be managed and configured using the following user
interface alternatives:
•
Working with an ASCII-based Control Terminal
•
•
Working with an ASCII-based Control Terminal
Any standard ASCII terminal or a PC station (running a terminal emulation
application), which is equipped with a V.24/RS-232 communication interface, can
be used to set up and configure ACE-3105, ACE-3205. You can connect the
terminal/station directly to the unit's control port for establishing out-of-band
management.
The terminal screens interface (see
) however, can also be used for
inband management (for example, via Telnet).
³
To set up terminal control:
1.
Make sure that all the cables are properly connected (for more information,
refer to
2.
Turn on the control terminal or start the PC terminal emulation (in
Windows XP: click Start> All Programs> Accessories> Communications>
HyperTerminal to create a new terminal connection.
The Connection Description dialog box is displayed.
Figure
3-3. HyperTerminal, Connection Description Dialog Box
3.
Enter description for the terminal connection.
4.
Select an icon to represent the terminal connection.
The Connect To dialog box is displayed.
