Chapter
4 Configuration
Installation and Operation Manual
4-8
Configuring for Management
ACE-3105, ACE-3205 Ver. 5.2
Parameter Description
Possible
Values
SNMPv3 engine
ID
Submenu for configuring the
SNMPv3 engine
Refer to
SNMPv3 settings
Submenu for configuring the
SNMPv3 parameters; available
only if the SNMPv3 functionality
is enabled (see above)
Refer to
Read
community
String that defines the read
community
Up to 20 alphanumeric
characters, case-sensitive
Default: Public
Write
community
String that defines the write
community
Up to 20 alphanumeric
characters, case-sensitive
Default: Public
Trap
community
String that defines the trap
community
Up to 20 alphanumeric
characters, case-sensitive
Default: Public
Viewing Device Information
The ACE-3105, ACE-3205 management software allows you to assign a name to
the unit, specify its location to distinguish it from the other devices installed in
your system and assign a contact person.
³
To access the Device Information menu:
•
From the Management menu (see
), select Device Information.
The following information screen is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> Device Information
Description ... (ACE-3205 HW Version: 10-A\0-A, SW Version: 5.20B1)
1. Contact ... (Name of contact person)
2. Name ... (ACE-3205)
3. Location ... (The location of this device)
>
Please select item <1 to 3>
ESC-previous menu; !-main menu; &-exit
Figure
4-8. Device Information Menu
