Chapter
4 Configuration
Installation and Operation Manual
4-30
Configuring for Management
ACE-3105, ACE-3205 Ver. 5.2
Parameter Description
Possible
Values
which the information is is presented
characters
Security name
The SNMPv3 security name to be mapped to
the SNMPv2/SNMPv2 community name
Up to 32 alphanumeric
characters
Transport tag
Specifies a set of the transport endpoints
that are used, in either of the following
methods:
•
Specifying the transport endpoints from
which an SNMP entity accepts
management requests
•
Specifying the transport endpoints to
which a notification may be sent, using
the community string matching the
corresponding instance of community
name.
As previously defined
for each target
Viewing the SNMPv3 Information
Instead of browsing, you can view the summary of all currently defined SNMPv3
targets, as well as the summary of all currently defined SNMPv3 users.
³
To view the summary of targets:
•
From the SNMPv3 Settings menu, select Summary Target Table.
The list of currently defined targets is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> SNMPv3 Settings> Summary Target Table
Summary Target Table
Address MPModel SecModel SecName SecLevel TagList
172.18.187.36 SNMPv1 SNMPv1 initial noAuthnoPriv allTraps
172.18.187.38 SNMPv1 SNMPv3 initial authPriv allTraps
Figure
4-25. SNMPv3 Targets List
³
To view the summary of users:
•
From the SNMPv3 Settings menu, select Summary User Table.
The list of currently defined users is displayed.