Installation and Operation Manual
Chapter
4 Configuration
ACE-3105, ACE-3205 Ver. 5.2
Configuring for Operation 4-103
³
To access the Multiservice over PSN options:
•
From the Logical Layer menu (see
), select Multiservice over PSN.
The Multiservice over PSN menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> Applications> Multiservice over PSN
1. General >
2. Peer >
3. PW >
4. View PW >
5. View ATM AC >
6. View TDM AC >
>
Please select item <1 to 6>
ESC-previous menu; !-main menu; &-exit
Figure
4-74. Multiservice over PSN Menu
Table
4-66. Multiservice over PSN Menu Options
Parameter Description
Possible
Values
General
Access the general multiservice over PSN
parameters configuration
Refer to
Peer
Access to the peer configuration
Refer to
Pseudo wire
(PW)
Access the PW configuration
Refer to
View PW
View the details of any existing PW
connection
Refer to
View ATM AC
Display general parameters of all
configured ATM AC
Refer to
View TDM AC
Display general parameters of all
configured TDM AC
Refer to
Configuring General Multiservice over PSN Parameters
The general parameters include packet misordering and reordering instructions
for ATM over PSN traffic.
³
To access the ATM parameters:
1.
From the Multiservice over PSN menu, select General.
The General menu is displayed.
2.
Select ATM Parameters.
The ATM Parameters menu is displayed.
